|
|
|
|
 |
POCKET
DOOR HARDWARE |
|
GIVE ANY ROOM MORE SPACE WITH
POCKET DOORS
Where a "traditional" swinging door takes up
valuable floor and wall space, the Johnson Pocket Door System literally
"fits right in" to solve room planning problems. |
|
conventional door
|
pocket door
|
|
 |
|
|
J  ohnson's Pocket Door
Hardware systems are designed to offer maximum space saving
characteristics for a multitude of applications. Pocket Doors are
particularly well suited for dining rooms, master bathrooms, wardrobes,
kitchens or anywhere floor space is at a premium. The use of a
pocket door will free up previously unusable wall and floor space with a
clean and modern appearance.
NEW!
CLICK HERE TO VIEW OUR POCKET DOOR
FRAME VIDEO
Johnson offers a large selection of Pocket Door Hardware and accessories
to fit virtually any residential or light commercial application. From
ready to assemble Pocket Door Frame Kits that can be put together in as
little as 15 minutes to prepackaged hardware systems that can be
configured for custom applications, Johnson hardware has the solution.
|
|
POCKET DOOR FRAMES FOR 2 x 4 STUD WALLS |
|
2000
|
HEAVY-DUTY
POCKET DOOR FRAMES
|
PRICE
RANGE
$186 - $362 |
 |
|
MAX DOOR SIZE: 60" x 108" x 1-3/4" (5' x 9') [1524 x 2724 x 44mm]
MAX DOOR WEIGHT: 300lbs. [136kg] |
|
click here for details |
FITS 2 x 4 STUD WALLS
NEW!
Similar to 1500 Series except has 200 series "I" beam track and
reinforced header section. Easily assembled, structurally strong pocket
door frame designed for fast installation in standard
2 x 4 timber/steel frame constructed
walls typically sheeted with drywall. Frames can be adapted for use in
thicker walls. Frames can be cut down to fit smaller size doors.
TESTED QUALITY:
Only frame independently tested to meet ANSI standards.
HEAVY-DUTY: Specially
reinforced header section designed for heavy door applications.
"I" BEAM
TRACK DESIGN:
Doors will not jump track or get stuck in pocket.
4-WHEEL
HANGERS:
Self leveling, smooth rolling, ball bearing, designed for heavy doors.
DETACHABLE HANGER PLATES:
Doors are easily installed, adjusted or removed.
SELF ADJUSTING FLOOR BRACKETS:
Compensates for uneven floors.
STEEL WRAPPED UPRIGHTS:
Ridged construction, stops nail penetration, zinc plated.
|
|
1500
|
HEAVY-DUTY
POCKET DOOR FRAME KITS |
PRICE
RANGE
$87 - $297 |
|
|
MAX DOOR SIZE: 60" x 108" x 1-3/4" (5' x 9') [1524 x 2724 x 44mm]
MAX DOOR WEIGHT: 200lbs. [91kg] |
click
here for details
|
FITS 2 x 4 STUD WALLS
#1 SELLER
Easily assembled, structurally strong pocket door frame designed for
fast installation in standard
2 x 4 timber/steel frame constructed
walls typically sheeted with drywall. Frames can be adapted for use in
thicker walls. Frames can be cut down to fit smaller size doors.
TESTED QUALITY:
Only frame independently tested to meet ANSI standards.
REMOVABLE TRACK:
Aluminum track can be removed without damaging wall.
BOX TRACK DESIGN:
Doors will not jump track or get stuck in pocket.
CONVEX RAIL TRACK:
Low-friction, single point hanger/wheel contact.
3-WHEEL HANGERS:
Self leveling, smooth rolling, designed for heavy doors.
DETACHABLE HANGER PLATES:
Doors are easily installed, adjusted or removed.
SELF ADJUSTING FLOOR BRACKETS:
Compensates for uneven floors.
STEEL WRAPPED UPRIGHTS:
Ridged construction, stops nail penetration, zinc plated.
|
|
2511
|
STANDARD-DUTY
POCKET DOOR FRAME KITS |
PRICE RANGE
$86 -
$98 |
|
|
MAX DOOR SIZE: 36" x 80" x 1-3/4" (3'- 0" x 6' 8") [914 x 2032 x 44mm]
MAX DOOR WEIGHT: 150lbs. [68kg] |
|
click
here for details
|
FITS 2 x 4 STUD WALLS
Same frame as 1500 except uses 111 series track and hanger.
Easily assembled, structurally strong pocket door frame designed
for fast installation in standard
2 x 4 timber/steel frame constructed
walls typically sheeted with drywall. Frames can be adapted for use in
thicker walls. Frames can be cut down to fit smaller size doors.
TESTED QUALITY:
Only frame independently tested to meet ANSI standards.
REMOVABLE TRACK:
Aluminum track can be removed without damaging wall.
BOX TRACK DESIGN:
Doors will not jump track or get stuck in pocket.
CONVEX RAIL TRACK:
Low-friction, single point hanger/wheel contact.
3-WHEEL HANGERS:
Self leveling, smooth rolling, designed for heavy doors.
DETACHABLE HANGER PLATES:
Doors are easily installed, adjusted or removed.
SELF ADJUSTING FLOOR BRACKETS:
Compensates for uneven floors.
STEEL WRAPPED UPRIGHTS:
Ridged construction, stops nail penetration, zinc plated.
|
|
POCKET DOOR FRAMES FOR 2 x 6 STUD WALLS |
|
2060
|
HEAVY-DUTY
"WIDE JAMB"
POCKET DOOR FRAMES |
PRICE RANGE
$240 -
$473 |
|
|
MAX DOOR SIZE: 60" x 108" x 2-1/4" (5' x 9') [1524 x 2724 x
57mm]
MAX DOOR WEIGHT: 300lbs. [136kg] |
|
click
here for details
|
FITS 2 x
6 STUD WALLS
NEW!
Heavy duty pocket door frame featuring heavy
gauge all steel split studs for maximum wall rigidity, 200 Series "I"
beam track
and hardware and
reinforced header section for heavy door applications. Wide header
section means that the 2060 can accept doors up to 2-1/4" [57mm]. Easily
assembled, structurally strong pocket door frame designed for fast
installation in
2 x 6 timber/steel frame constructed
walls typically sheeted with drywall. Frames can be adapted for use in
thicker walls and cut down to fit smaller size doors.
TESTED QUALITY:
Only frame independently tested to meet ANSI standards.
HEAVY-DUTY: Specially
reinforced header section designed for heavy door applications.
"I" BEAM
TRACK DESIGN:
Doors will not jump track or get stuck in pocket.
4-WHEEL
HANGERS:
Self leveling, smooth rolling, ball bearing, designed for heavy doors.
DETACHABLE HANGER PLATES:
Doors are easily installed, adjusted or removed.
SELF ADJUSTING FLOOR BRACKETS:
Compensates for uneven floors.
ALL
STEEL UPRIGHTS:
All steel construction for maximum rigidity and no warpage.
|
|
1560
|
"WIDE JAMB"
POCKET DOOR FRAMES |
PRICE RANGE
$135 -
$336 |
|
|
MAX DOOR SIZE: 60" x 108" x 3" (5' x 9') [1524 x 2743 x 76mm]
MAX DOOR WEIGHT: 200lbs. [91kg] |
|
click
here for details
|
FITS 2 x 6 STUD WALLS
Same construction as the 1500 except the track-header is 5-1/2" wide, for
use in 2 x 6 stud walls, and will accept doors up to 3" thick.
Easily assembled, structurally strong pocket door frame designed for fast
installation in standard
2 x 6 timber/steel frame constructed
walls typically sheeted with drywall. Frames can be adapted for use in
thicker walls or can be cut down to fit smaller size doors.
TESTED QUALITY:
Only frame independently tested to meet ANSI standards.
REMOVABLE TRACK:
Aluminum track can be removed without damaging wall.
BOX TRACK DESIGN:
Doors will not jump track or get stuck in pocket.
CONVEX RAIL TRACK:
Low-friction, single point hanger/wheel contact.
3-WHEEL HANGERS:
Self leveling, smooth rolling, designed for heavy doors.
DETACHABLE HANGER PLATES:
Doors are easily installed, adjusted or removed.
SELF ADJUSTING FLOOR BRACKETS:
Compensates for uneven floors.
STEEL WRAPPED UPRIGHTS:
Ridged construction, stops nail penetration, zinc plated.
|
|
POCKET DOOR HARDWARE FOR ON-SITE CONSTRUCTION |
|
200PD
|
HEAVY-DUTY POCKET DOOR
HARDWARE |
PRICE RANGE
$82 -
$114 |
|
|
MINIMUM DOOR THICKNESS: 1-1/8" [29mm]
MAX DOOR WEIGHT: 300lbs. [136kg] |
|
click here for details
|
A heavy duty
commercial/residential grade hardware set designed for use in custom
pocket door applications. Heavy duty extruded aluminum I-beam track, four
wheel ball bearing hangers with machine turned wheels, zinc dichromate
plated steel components. |
BULK PARTS |
|
100PD |
HEAVY DUTY POCKET DOOR HARDWARE |
PRICE RANGE
$27 - $52 |
|
|
MINIMUM DOOR THICKNESS: 1" [25mm]
MAX DOOR WEIGHT: 200lbs. [91kg] |
|
click here for details
|
Heavy duty hardware set
designed for use in custom pocket door projects. Trouble-free tricycle
hangers with machine turned wheels ride smoothly on jump proof convex
rails. Aluminum box track, zinc dichromate plated steel components. |
BULK PARTS |
|
111PD |
MEDIUM DUTY POCKET
DOOR HARDWARE |
PRICE RANGE
$15.54 -
$28.48 |
|
|
MINIMUM DOOR THICKNESS: 3/4" [19mm]
MAX DOOR WEIGHT: 150lbs. [68kg] |
|
click here for details
|
Residential duty
hardware set for custom pocket door projects. Similar to 100PD except
designed for lighter doors. Compact size extruded aluminum track.
Trouble-free tricycle hangers with machine turned 3/4" wheels ride on jump
proof convex rails. 14-16 gauge zinc dichromate plated steel components. |
BULK PARTS |
|
2610F |
WALL MOUNT HARDWARE |
PRICE RANGE
$44 - $87 |
|
|
MAX DOOR THICKNESS: 1-3/4” [44mm]
MAX DOOR WEIGHT: 200lbs. [91kg] |
 |
|
click here for details
|
Wall mounted hardware set
designed for applications where construction of typical pocket doors is
prohibitive. Wall mounted adjustable door guide, balanced tricycle wheel
hangers, Precision extruded aluminum track with jump proof convex rails.
14 gauge zinc dichromate plated steel components. |
BULK PARTS |
|
2800 |
POCKET DOOR HARDWARE
(SINGLE RAIL) |
PRICE RANGE
$15 -
$30 |
|
|
MINIMUM DOOR THICKNESS: 1-1/8” [29mm]
MAX DOOR WEIGHT: 75lbs. [34kg] |
|
click here for details
|
Economical pocket door
hardware system designed and packaged primarily for "on the job"
construction of pocket doors, but also usable in combinations with itself
or other Johnson series tracks for special installations of sliding doors.
Single wheel adjustable hangers. 14-16 gauge zinc dichromate plated steel
components.
|
BULK PARTS |
|
2800F
|
OPEN POCKET DOOR
HARDWARE |
PRICE RANGE
$41 -
$54 |
|
|
MAX DOOR THICKNESS: 1-3/4” [44mm]
MAX DOOR WEIGHT: 75lbs. [34kg] |
 |
|
click here for details
|
Space-saving, header mounted
"Open Pocket Door" hardware system. Includes height adjustable twin wheel
ball bearing hangers rolling on a aluminum single convex rail track with
fascia on both sides. 14-18 gauge zinc dichromate plated steel components. |
BULK PARTS |
|
UNIVERSAL POCKET DOOR
JAMB SETS |
PRICE RANGE
$48 -
$68 |
|
|
click here for details |
PRE CUT FOR
4-9/16" [115mm]
FINISHED WALL THICKNESS |
|
A fast convenient method of finishing a Pocket
Door Frame opening. Just cut to length and install the jambs. Pre-sanded
and ready to finish.
Trim NOT included. |
|
POCKET
DOOR LOCKS |
PRICE RANGE
$20 -
$27 |
|
|
click here for details |
FOR
1-3/8" or 1-3/4" [35mm or 45mm] THICK DOORS |
| Pocket Doors lock and unlock
at a fingers touch, with emergency release. Non-handed for right or left
sliding doors. Standard 2-3/8" [60mm] back set, 2-1/8" [54mm] lock bore
and 15/16" [24mm] end bore. Three finishes available. Zinc dichromate
plated steel components. |
|
|